244 lines
7.4 KiB
Python
244 lines
7.4 KiB
Python
#!/usr/bin/env python3
|
|
"""
|
|
AI-Box Demo 自动化测试框架
|
|
测试工程师: 沙千里
|
|
日期: 2026-03-05
|
|
"""
|
|
|
|
import pytest
|
|
import time
|
|
import subprocess
|
|
import json
|
|
from datetime import datetime
|
|
from typing import Dict, Any
|
|
|
|
# ==================== 配置 ====================
|
|
CONFIG = {
|
|
"device_ip": "192.168.1.100",
|
|
"serial_port": "/dev/ttyUSB0",
|
|
"baudrate": 115200,
|
|
"timeout": 30,
|
|
"log_path": "./reports/",
|
|
}
|
|
|
|
# ==================== Fixture ====================
|
|
@pytest.fixture(scope="session")
|
|
def device_connection():
|
|
"""设备连接 Fixture"""
|
|
# TODO: 实现设备连接
|
|
conn = {
|
|
"serial": None,
|
|
"ssh": None,
|
|
}
|
|
yield conn
|
|
# 清理
|
|
if conn.get("serial"):
|
|
conn["serial"].close()
|
|
|
|
@pytest.fixture(scope="function")
|
|
def test_logger(request):
|
|
"""测试日志 Fixture"""
|
|
logger = TestLogger(request.node.name)
|
|
yield logger
|
|
logger.close()
|
|
|
|
# ==================== 工具类 ====================
|
|
class TestLogger:
|
|
def __init__(self, test_name: str):
|
|
self.test_name = test_name
|
|
self.start_time = time.time()
|
|
self.logs = []
|
|
print(f"[{test_name}] 测试开始")
|
|
|
|
def log(self, level: str, message: str):
|
|
timestamp = datetime.now().strftime("%H:%M:%S.%f")[:-3]
|
|
entry = f"[{timestamp}] [{level}] {message}"
|
|
self.logs.append(entry)
|
|
print(entry)
|
|
|
|
def info(self, message: str):
|
|
self.log("INFO", message)
|
|
|
|
def error(self, message: str):
|
|
self.log("ERROR", message)
|
|
|
|
def pass_test(self):
|
|
duration = time.time() - self.start_time
|
|
self.log("PASS", f"测试通过 (耗时: {duration:.2f}s)")
|
|
|
|
def fail_test(self, reason: str):
|
|
duration = time.time() - self.start_time
|
|
self.log("FAIL", f"测试失败: {reason} (耗时: {duration:.2f}s)")
|
|
raise AssertionError(reason)
|
|
|
|
def close(self):
|
|
duration = time.time() - self.start_time
|
|
print(f"[{self.test_name}] 测试结束 (总耗时: {duration:.2f}s)")
|
|
|
|
|
|
class DeviceController:
|
|
"""设备控制器 - 封装设备操作"""
|
|
|
|
@staticmethod
|
|
def send_command(cmd: str, timeout: int = 10) -> Dict[str, Any]:
|
|
"""发送命令到设备"""
|
|
try:
|
|
result = subprocess.run(
|
|
cmd, shell=True, timeout=timeout,
|
|
capture_output=True, text=True
|
|
)
|
|
return {
|
|
"success": result.returncode == 0,
|
|
"stdout": result.stdout,
|
|
"stderr": result.stderr,
|
|
"returncode": result.returncode,
|
|
}
|
|
except subprocess.TimeoutExpired:
|
|
return {"success": False, "error": "命令超时"}
|
|
except Exception as e:
|
|
return {"success": False, "error": str(e)}
|
|
|
|
@staticmethod
|
|
def check_ping(host: str, count: int = 4) -> bool:
|
|
"""检查设备网络连通性"""
|
|
result = subprocess.run(
|
|
f"ping -c {count} {host}",
|
|
shell=True, capture_output=True
|
|
)
|
|
return result.returncode == 0
|
|
|
|
|
|
# ==================== 测试基类 ====================
|
|
class BaseTest:
|
|
"""测试基类"""
|
|
|
|
def setup_method(self):
|
|
"""每个测试方法前执行"""
|
|
self.logger = TestLogger(self.__class__.__name__)
|
|
self.device = DeviceController()
|
|
|
|
def teardown_method(self):
|
|
"""每个测试方法后执行"""
|
|
pass
|
|
|
|
|
|
# ==================== 电源管理测试 ====================
|
|
class TestPowerManagement(BaseTest):
|
|
"""电源管理测试类"""
|
|
|
|
def test_pm_001_power_on_sequence(self, device_connection, test_logger):
|
|
"""TC-PM-001: 上电时序测试"""
|
|
test_logger.info("开始上电时序测试")
|
|
|
|
# 检查设备响应
|
|
if DeviceController.check_ping(CONFIG["device_ip"]):
|
|
test_logger.info("设备已开机")
|
|
# TODO: 获取启动日志分析时序
|
|
test_logger.pass_test()
|
|
else:
|
|
test_logger.fail_test("设备无响应")
|
|
|
|
def test_pm_002_normal_shutdown(self, test_logger):
|
|
"""TC-PM-002: 正常下电流程测试"""
|
|
test_logger.info("开始正常下电测试")
|
|
# TODO: 实现下电测试逻辑
|
|
test_logger.pass_test()
|
|
|
|
def test_pm_003_abnormal_power_off(self, test_logger):
|
|
"""TC-PM-003: 异常断电测试"""
|
|
test_logger.info("开始异常断电测试")
|
|
# TODO: 实现异常断电测试
|
|
test_logger.pass_test()
|
|
|
|
|
|
# ==================== MCU-SoC通信测试 ====================
|
|
class TestMCUSoCCommunication(BaseTest):
|
|
"""MCU-SoC通信测试类"""
|
|
|
|
def test_mcu_001_comm_link_establish(self, test_logger):
|
|
"""TC-MCU-001: 通信链路建立测试"""
|
|
test_logger.info("开始通信链路建立测试")
|
|
# TODO: 实现通信链路测试
|
|
test_logger.pass_test()
|
|
|
|
def test_mcu_002_heartbeat(self, test_logger):
|
|
"""TC-MCU-002: 心跳机制验证"""
|
|
test_logger.info("开始心跳机制测试")
|
|
# TODO: 实现心跳测试
|
|
test_logger.pass_test()
|
|
|
|
def test_mcu_003_data_integrity(self, test_logger):
|
|
"""TC-MCU-003: 数据传输完整性测试"""
|
|
test_logger.info("开始数据传输完整性测试")
|
|
# TODO: 实现数据完整性测试
|
|
test_logger.pass_test()
|
|
|
|
|
|
# ==================== 传感器测试 ====================
|
|
class TestSensors(BaseTest):
|
|
"""传感器测试类"""
|
|
|
|
def test_sen_001_temperature_accuracy(self, test_logger):
|
|
"""TC-SEN-001: 温度传感器准确性测试"""
|
|
test_logger.info("开始温度准确性测试")
|
|
# TODO: 实现温度测试
|
|
test_logger.pass_test()
|
|
|
|
def test_sen_002_humidity_accuracy(self, test_logger):
|
|
"""TC-SEN-002: 湿度传感器准确性测试"""
|
|
test_logger.info("开始湿度准确性测试")
|
|
# TODO: 实现湿度测试
|
|
test_logger.pass_test()
|
|
|
|
|
|
# ==================== 音视频测试 ====================
|
|
class TestAudioVideo(BaseTest):
|
|
"""音视频测试类"""
|
|
|
|
def test_av_001_video_capture(self, test_logger):
|
|
"""TC-AV-001: 视频采集功能测试"""
|
|
test_logger.info("开始视频采集测试")
|
|
# TODO: 实现视频采集测试
|
|
test_logger.pass_test()
|
|
|
|
def test_av_002_video_recording(self, test_logger):
|
|
"""TC-AV-002: 视频录制功能测试"""
|
|
test_logger.info("开始视频录制测试")
|
|
# TODO: 实现视频录制测试
|
|
test_logger.pass_test()
|
|
|
|
|
|
# ==================== 系统集成测试 ====================
|
|
class TestSystemIntegration(BaseTest):
|
|
"""系统集成测试类"""
|
|
|
|
def test_sys_001_full_startup(self, test_logger):
|
|
"""TC-SYS-001: 完整启动流程测试"""
|
|
test_logger.info("开始完整启动流程测试")
|
|
# TODO: 实现启动流程测试
|
|
test_logger.pass_test()
|
|
|
|
def test_sys_002_module_integration(self, test_logger):
|
|
"""TC-SYS-002: 多模块协同工作测试"""
|
|
test_logger.info("开始多模块协同测试")
|
|
# TODO: 实现模块协同测试
|
|
test_logger.pass_test()
|
|
|
|
|
|
# ==================== Pytest配置 ====================
|
|
def pytest_configure(config):
|
|
"""Pytest配置"""
|
|
config.addinivalue_line(
|
|
"markers", "smoke: 冒烟测试"
|
|
)
|
|
config.addinivalue_line(
|
|
"markers", "regression: 回归测试"
|
|
)
|
|
config.addinivalue_line(
|
|
"markers", "stress: 压力测试"
|
|
)
|
|
|
|
|
|
if __name__ == "__main__":
|
|
# 运行测试
|
|
pytest.main([__file__, "-v", "--html=reports/report.html"]) |